Reactor Control - Revision history

Aroostook Research Corporation at 02:23, 22 January 2026

2026-01-22T02:23:58Z

← Older revision		Revision as of 22:23, 21 January 2026
Line 12:		Line 12:

	==== Main Core Control Panel ====		==== Main Core Control Panel ====
	This panel allows the user to initialize a system/core start up; you can also enable manual [[Reactor Start up guide\|core start up]] here. Both of these start up buttons also have their own respective ~~[[Reactor~~ shut down ~~guide\|shut down]]~~ buttons, which can both be activated during certain conditions.		This panel allows the user to initialize a system/core start up; you can also enable manual [[Reactor Start up guide\|core start up]] here. Both of these start up buttons also have their own respective shut down buttons, which can both be activated during certain conditions.

	==== Fan Control Panel ====		==== Fan Control Panel ====

AfternoonGoose: Fixed the Hydrogen and Nitrogen hyperlinks.

2026-01-20T22:21:04Z

Fixed the Hydrogen and Nitrogen hyperlinks.

← Older revision		Revision as of 18:21, 20 January 2026
Line 20:		Line 20:

	==== Hydrogen Injection System Control Panel ====		==== Hydrogen Injection System Control Panel ====
	This panel is responsible for distributing [[hydrogen]] to both the core and to the stabilizer coolant pumps. The two pumps on this panel feed into 6 valves, 2 of those being feed line A and B; the other four go into the 4 individual stabilizer coolant pumps. Feeding hydrogen into the core will increase reactivity, increasing temperature. Any hydrogen concentration level below 20% will begin causing huge drops in reactivity eventually leading to core stall. Hydrogen concentration levels can be maintained using both the pumps and the core stabilizers. All 8 stabilizers at 100% will completely stabilize the hydrogen concentration level regardless of hydrogen pump input.		This panel is responsible for distributing [[wikipedia:Hydrogen\|hydrogen]] to both the core and to the stabilizer coolant pumps. The two pumps on this panel feed into 6 valves, 2 of those being feed line A and B; the other four go into the 4 individual stabilizer coolant pumps. Feeding hydrogen into the core will increase reactivity, increasing temperature. Any hydrogen concentration level below 20% will begin causing huge drops in reactivity eventually leading to core stall. Hydrogen concentration levels can be maintained using both the pumps and the core stabilizers. All 8 stabilizers at 100% will completely stabilize the hydrogen concentration level regardless of hydrogen pump input.

	==== Nitrogen Injection System Control Panel ====		==== Nitrogen Injection System Control Panel ====
	This panel will inject [[nitrogen]] into the core. It does not contribute to stabilizer coolant loop. Adding nitrogen to the core will decrease its reactivity, causing a drop in temperature. However a certain amount of nitrogen is still needed to maintain critical reactor function; any drop below 20% will cause a large drop in reactor temperatures. Just like hydrogen concentration, nitrogen concentration can also be stabilized using the stabilizer.		This panel will inject [[wikipedia:Nitrogen\|nitrogen]] into the core. It does not contribute to stabilizer coolant loop. Adding nitrogen to the core will decrease its reactivity, causing a drop in temperature. However a certain amount of nitrogen is still needed to maintain critical reactor function; any drop below 20% will cause a large drop in reactor temperatures. Just like hydrogen concentration, nitrogen concentration can also be stabilized using the stabilizer.

	==== Safety System Panel ====		==== Safety System Panel ====

Cat: grammar

2026-01-20T12:07:51Z

grammar

← Older revision		Revision as of 08:07, 20 January 2026
Line 3:		Line 3:
	== Reactor Control Panels ==		== Reactor Control Panels ==

	=== Panel Alpha: ===		=== Panel Alpha ===

	==== Stabilizer Control Control ====		==== Stabilizer Control Control ====
Line 9:		Line 9:

	==== Stabilizer Coolant Control ====		==== Stabilizer Coolant Control ====
	This panel is responsible for the coolant and temperature regulation of the 8 stabilizers, it has 4 pumps that are fed from the main hydrogen feed into the stabilizer coolant loop, before then going into the core feed lines. Each stabilizer coolant pump cools both stabilizers of its group (Pump A feed stabilizer A-1 and A-2), the cooling for both stabilizers can either be toggled on or off by opening or closing their respective valves.		This panel is responsible for the coolant and temperature regulation of the 8 stabilizers; it has 4 pumps that are fed from the main hydrogen feed into the stabilizer coolant loop before then going into the core feed lines. Each stabilizer coolant pump cools both stabilizers of its group (Pump A feed stabilizer A-1 and A-2); the cooling for both stabilizers can either be toggled on or off by opening or closing their respective valves.

	==== Main Core Control Panel ====		==== Main Core Control Panel ====
	This panel allows the user to initialize a system/core start up, you can also enable manual [[Reactor Start up guide\|core start up]] here. ~~both~~ these start up buttons also have their own respective [[Reactor shut down guide\|shut down]] buttons, which can both be activated during certain ~~condition~~.		This panel allows the user to initialize a system/core start up; you can also enable manual [[Reactor Start up guide\|core start up]] here. Both of these start up buttons also have their own respective [[Reactor shut down guide\|shut down]] buttons, which can both be activated during certain conditions.

	==== Fan Control Panel ====		==== Fan Control Panel ====
	This panel controls both Core Chamber fans, ~~these fans~~ regulate the air temperature. Air temperature is ~~effected~~ by the average stabilizer temperature across all 8 stabilizers, stabilizer temps are also ~~effected~~ by the air temperature itself. If the temperature is left unchecked this can cause a positive feedback loop, increasing stabilizer temperatures and causing potential stabilizer trips to occur.		This panel controls both Core Chamber fans, which regulate the air temperature. Air temperature is affected by the average stabilizer temperature across all 8 stabilizers; stabilizer temps are also affected by the air temperature itself. If the temperature is left unchecked, this can cause a positive feedback loop, increasing stabilizer temperatures and causing potential stabilizer trips to occur.

	=== Panel Bravo: ===		=== Panel Bravo ===

	==== Hydrogen Injection System Control Panel ====		==== Hydrogen Injection System Control Panel ====
	This panel is responsible for distributing hydrogen to both the core and to the stabilizer coolant pumps~~, the~~ two pumps on this panel feed into 6 valves, 2 of those being ~~both~~ feed line A and B, the other go into the 4 individual stabilizer coolant pumps. Feeding hydrogen into the core will increase reactivity, increasing temperature. Any hydrogen concentration level below 20% will begin causing huge drops in reactivity eventually leading to core stall. ~~hydrogen~~ concentration levels can be maintained using both the pumps and the core stabilizers~~, all~~ 8 stabilizers at 100% will completely ~~stabilizer~~ the hydrogen concentration level regardless of hydrogen pump input.		This panel is responsible for distributing [[hydrogen]] to both the core and to the stabilizer coolant pumps. The two pumps on this panel feed into 6 valves, 2 of those being feed line A and B; the other four go into the 4 individual stabilizer coolant pumps. Feeding hydrogen into the core will increase reactivity, increasing temperature. Any hydrogen concentration level below 20% will begin causing huge drops in reactivity eventually leading to core stall. Hydrogen concentration levels can be maintained using both the pumps and the core stabilizers. All 8 stabilizers at 100% will completely stabilize the hydrogen concentration level regardless of hydrogen pump input.

	==== Nitrogen Injection System Control Panel ====		==== Nitrogen Injection System Control Panel ====
	This panel~~, just like the Hydrogen Injection panel. Will~~ inject ~~Nitrogen~~ into the core~~, it~~ does not contribute to stabilizer coolant loop. Adding nitrogen to the core will decrease its reactivity, causing a drop in temperature. However a certain amount of nitrogen is still needed to maintain critical reactor function, any drop below 20% will cause a large drop in reactor temperatures. Just like hydrogen concentration, nitrogen concentration can also be stabilized using the stabilizer.		This panel will inject [[nitrogen]] into the core. It does not contribute to stabilizer coolant loop. Adding nitrogen to the core will decrease its reactivity, causing a drop in temperature. However a certain amount of nitrogen is still needed to maintain critical reactor function; any drop below 20% will cause a large drop in reactor temperatures. Just like hydrogen concentration, nitrogen concentration can also be stabilized using the stabilizer.

	==== Safety System Panel ====		==== Safety System Panel ====
Line 31:		Line 31:

	==== Electrical Distribution Panel ====		==== Electrical Distribution Panel ====
	This panel controls the breakers used to power the Reactor Complex and all ~~it's~~ equipment~~, opening~~ or closing these breakers will cause cascading effects across all systems.		This panel controls the breakers used to power the Reactor Complex and all its equipment. Opening or closing these breakers will cause cascading effects across all systems.

	==== Ionized Proton Accelerator Control Panel ====		==== Ionized Proton Accelerator Control Panel ====
Line 37:		Line 37:

	=== Central Desk ===		=== Central Desk ===
	The central desk contains 2 computers~~, the~~ far left one ~~acting~~ as a log system~~. Documenting~~ all panel control changes that ~~player~~ make, and documenting all important events that may occur such as but not limited to~~. Bus~~ disconnects, start-up failures, and high/low temperature warnings.		The central desk contains 2 computers. The far-left one acts as a log system, documenting all panel control changes that players make, and documenting all important events that may occur, such as but not limited to: bus disconnects, start-up failures, and high/low temperature warnings.

	The desk also contains 2 books~~, these~~ books act as a guide to the player, one being an overall guide documenting all reactor panels and controls~~. The~~ other documenting all annunciator panel protocols.		The desk also contains 2 books. These books act as a guide to the player, one being an overall guide documenting all reactor panels and controls, and the other documenting all annunciator panel protocols.

			This desk also has a "Master acknowledge" button, which will acknowledge all annunciator panels within the control room.

	~~This desk also has a "Master acknowledge" button, this will acknowledge all annunciator panels within the control room.~~
	[[Category:Aroostook Research Facility]]		[[Category:Aroostook Research Facility]]
	[[Category:Aroostook]]		[[Category:Aroostook]]
	[[Category:Locations]]		[[Category:Locations]]

Aroostook Research Corporation: Added descriptions for each control panel

2026-01-20T11:49:29Z

Added descriptions for each control panel

← Older revision		Revision as of 07:49, 20 January 2026
Line 3:		Line 3:
	== Reactor Control Panels ==		== Reactor Control Panels ==

	==== Panel Alpha: ====		=== Panel Alpha: ===

	* Stabilizer Control Control		==== Stabilizer Control Control ====
	* Stabilizer Coolant Control		This panel is responsible for controlling stabilizer power setpoints and directly toggling on or off all 8 individual stabilizers. It also has a trip panel which has the ability to manually trip or reset individual stabilizers
	* Main Core Control Panel
	* Fan Control Panel

	==== ~~Panel Bravo:~~ ====		==== Stabilizer Coolant Control ====
			This panel is responsible for the coolant and temperature regulation of the 8 stabilizers, it has 4 pumps that are fed from the main hydrogen feed into the stabilizer coolant loop, before then going into the core feed lines. Each stabilizer coolant pump cools both stabilizers of its group (Pump A feed stabilizer A-1 and A-2), the cooling for both stabilizers can either be toggled on or off by opening or closing their respective valves.

	* Hydrogen Injection System Control Panel		==== Main Core Control Panel ====
	* Nitrogen Injection System Control Panel		This panel allows the user to initialize a system/core start up, you can also enable manual [[Reactor Start up guide\|core start up]] here. both these start up buttons also have their own respective [[Reactor shut down guide\|shut down]] buttons, which can both be activated during certain condition.
	* Safety System Panel

	==== Panel ~~Charlie~~ ====		==== Fan Control Panel ====
			This panel controls both Core Chamber fans, these fans regulate the air temperature. Air temperature is effected by the average stabilizer temperature across all 8 stabilizers, stabilizer temps are also effected by the air temperature itself. If the temperature is left unchecked this can cause a positive feedback loop, increasing stabilizer temperatures and causing potential stabilizer trips to occur.

	* Electrical Distribution Panel		=== Panel Bravo: ===
	* Ionized Proton Accelerator Control Panel
			==== Hydrogen Injection System Control Panel ====
			This panel is responsible for distributing hydrogen to both the core and to the stabilizer coolant pumps, the two pumps on this panel feed into 6 valves, 2 of those being both feed line A and B, the other go into the 4 individual stabilizer coolant pumps. Feeding hydrogen into the core will increase reactivity, increasing temperature. Any hydrogen concentration level below 20% will begin causing huge drops in reactivity eventually leading to core stall. hydrogen concentration levels can be maintained using both the pumps and the core stabilizers, all 8 stabilizers at 100% will completely stabilizer the hydrogen concentration level regardless of hydrogen pump input.

			==== Nitrogen Injection System Control Panel ====
			This panel, just like the Hydrogen Injection panel. Will inject Nitrogen into the core, it does not contribute to stabilizer coolant loop. Adding nitrogen to the core will decrease its reactivity, causing a drop in temperature. However a certain amount of nitrogen is still needed to maintain critical reactor function, any drop below 20% will cause a large drop in reactor temperatures. Just like hydrogen concentration, nitrogen concentration can also be stabilized using the stabilizer.

			==== Safety System Panel ====
			This panel contains an extra set of nitrogen and hydrogen pumps.

			=== Panel Charlie ===

			==== Electrical Distribution Panel ====
			This panel controls the breakers used to power the Reactor Complex and all it's equipment, opening or closing these breakers will cause cascading effects across all systems.

			==== Ionized Proton Accelerator Control Panel ====
			This panel has no current functionality in Alpha 1, it will eventually be used in Alpha 2 to distribute electricity to the grid.

	=== Central Desk ===		=== Central Desk ===

Aroostook Research Corporation: Added categories

2026-01-19T21:44:46Z

Added categories

← Older revision		Revision as of 17:44, 19 January 2026
Line 27:		Line 27:

	This desk also has a "Master acknowledge" button, this will acknowledge all annunciator panels within the control room.		This desk also has a "Master acknowledge" button, this will acknowledge all annunciator panels within the control room.
			[[Category:Aroostook Research Facility]]
			[[Category:Aroostook]]
			[[Category:Locations]]

Aroostook Research Corporation at 20:39, 19 January 2026

2026-01-19T20:39:29Z

← Older revision		Revision as of 16:39, 19 January 2026
Line 1:		Line 1:
	~~{{Location\|title=Reactor Control\|image=Control Room 1.png\|location=Sector D-1\|inhabitants=Jebediah}}~~

	The Reactor Control room is the main focus for gameplay in the Aroostook Research Facility, used to control and maintain the reactor.		The Reactor Control room is the main focus for gameplay in the Aroostook Research Facility, used to control and maintain the reactor.

Aroostook Research Corporation: Created page with "{{Location|title=Reactor Control|image=Control Room 1.png|location=Sector D-1|inhabitants=Jebediah}} The Reactor Control room is the main focus for gameplay in the Aroostook Research Facility, used to control and maintain the reactor. == Reactor Control Panels == ==== Panel Alpha: ==== * Stabilizer Control Control * Stabilizer Coolant Control * Main Core Control Panel * Fan Control Panel ==== Panel Bravo: ==== * Hydrogen Injection System Control Panel * Nitrogen In..."

2026-01-19T19:50:10Z

Created page with "{{Location|title=Reactor Control|image=Control Room 1.png|location=Sector D-1|inhabitants=Jebediah}} The Reactor Control room is the main focus for gameplay in the Aroostook Research Facility, used to control and maintain the reactor. == Reactor Control Panels == ==== Panel Alpha: ==== * Stabilizer Control Control * Stabilizer Coolant Control * Main Core Control Panel * Fan Control Panel ==== Panel Bravo: ==== * Hydrogen Injection System Control Panel * Nitrogen In..."

New page

{{Location|title=Reactor Control|image=Control Room 1.png|location=Sector D-1|inhabitants=Jebediah}}

The Reactor Control room is the main focus for gameplay in the Aroostook Research Facility, used to control and maintain the reactor.

== Reactor Control Panels ==

==== Panel Alpha: ====

* Stabilizer Control Control
* Stabilizer Coolant Control
* Main Core Control Panel
* Fan Control Panel

==== Panel Bravo: ====

* Hydrogen Injection System Control Panel
* Nitrogen Injection System Control Panel
* Safety System Panel

==== Panel Charlie ====

* Electrical Distribution Panel
* Ionized Proton Accelerator Control Panel

=== Central Desk ===
The central desk contains 2 computers, the far left one acting as a log system. Documenting all panel control changes that player make, and documenting all important events that may occur such as but not limited to. Bus disconnects, start-up failures, and high/low temperature warnings.

The desk also contains 2 books, these books act as a guide to the player, one being an overall guide documenting all reactor panels and controls. The other documenting all annunciator panel protocols.

This desk also has a "Master acknowledge" button, this will acknowledge all annunciator panels within the control room.